Item # bci1248669
Norton ADA Compliant Adjustable Spring Sizes 1-6 Institutional Hold Open Door Closer with Slim Cover from the 7500 Series
Model: 7500H689
from the 7500 Collection
$426.40
Finish: Choose Finish
- Aluminum$426.4084 In Stock
Free Shipping!
Product Overview
ADA Compliant Adjustable Spring Sizes 1-6 Institutional Hold-Open Door Closer with Slim Cover
Norton Door Controls offers traditional surface, industrial economy, overhead concealed, security, commercial, architectural, electromechanical and electrified closers. To complement the closers, Norton also offers a unique range of arms to help provide maximum door and frame protection. Since 1957, Norton Door Controls have been manufactured in Monroe, North Carolina.
Features
- Hold Open
- Adjustable through the entire power range of door closer sizes 1 through 6, as outlined in ANSI/BHMA standard A156.4.
- The series 7500 conforms to the minimum opening force requirements of the Americans with Disabilities Act (A.D.A.) and ANSI/BHMA standard A117.1 for interior doors.
- Closer bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions.
- Rack & Pinion Operation Provides a smooth constant control of the door through its full opening and closing cycle. 180° door swing can be achieved when door, frame, hardware and arm function do not interfere.
- Door closers is non-handed and can be installed on either right or left hand swing doors. Pinion shaft extends vertically through the closer body in both directions.
- Sweep Speed Control Valve Allows adjustment of door speed from the door's full open position down to approximately 10° from the closed position.
- Tri-Style® Packing7500 comes with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations.
- Adjustable Back check Cushion Valve Provides control of the door in the opening cycle, beginning at approximately 75° of door opening. It slows/cushions the door opening, when the door is forcibly opened beyond its pre-adjusted limits.
- Adjustable Back check Position Valve Allows the door opening position, where back check cushioning begins, to be adjusted to a greater door angle, up to a maximum of 20° farther (approximately 95°).
- Standard Molded Cover Molded of high-impact U.L. listed material and covers the entire closer body assembly. This cover is non-handed for all applications.
- These closers carry a limited ten-year warranty against defect, and life of the building on the aluminum housing.
- Nor Glide® closer fluid is a specially formulated multi-viscosity hydraulic fluid that contains lubricity and anti-oxidation agents that provide optimum performance and efficiency. This fluid complements the interaction of the door closer's aluminum housing with its steel and brass components, while maintaining stable viscosity to allow the door closer to perform in temperatures ranging from extremely high to as low as-40° F.
Additional Norton Links
Dimensions and Measurements
Closer Body Length
13.625 in.
Closer Size
1-6
Door Thickness
1-1/2", 1-3/4", 1-3/8", 1-5/8"
Height
3.875 in.
Horizontal Mounting Holes
6.75 in.
Max Door Opening
180 Degrees
Max Door Width
54 in.
Projection
2.125 in.
Vertical Mounting Holes
6.75 in.
Included Components
Cushion Stop
No
Characteristics and Features
Adjustable Backcheck
Yes
Adjustable Spring
Yes
Arm Type
Hold Open
Barrier Free
Yes
Delay Action
No
Function
Adjustable
Handing
Left, Reversible, Right
Hold Open
Yes
Material
Aluminum
Mounting
Parallel, Regular, Top Jamb, Tri-Pack
Operation Mode
Hydraulic
Shell Material
Plastic
Electrical and Operational Information
Adjustable Closing Speed
Yes
Adjustable Latching Speed
Yes
Warranty and Product Information
ADA
Yes
ANSI Certification
A156.4
Approved for Commercial Use
Yes
BHMA Certification
Grade 1
Certifications
ANSI, UL10C, UL
Collection
7500
Fire Rated
Yes
Manufacturer Warranty
25 Year
Series
7500
Usage Level
Standard Duty
Send to a Friend